Aspire Digital 2010, 2020 manual Lcd Fpc

Power Management-Related Symptoms

Symptom / Error	Action in Sequence
System hangs intermittently.	Reconnect hard disk drives.
	Hard disk drive connector
	Main board
Peripheral-Related Symptoms
Symptom / Error	Action in Sequence
System configuration does not match the	Enter BIOS Setup Utility to execute “Load Setup defaults”,
installed devices.	then reboot system.
	Reconnect hard disk/CD-ROM/diskette drives.
External display does not work correctly.	See if there is an error beep. If there is an erro beep, then
	change main board.
	Power off. Then check if RAM CPU BIOS are well-
	connected.
	Press Fn+F5 three times slowly
	LCD FPC
	LCD inverter
	LCD
USB does not work correctly	USB device cable is firmly connected into the USB ports.
	Test one USB port each time.
	USB socket is firmly secured to the main board.
	Main board
Print problems.	Ensure the “Parallel Port” in the “System Devices” of BIOS
	Setup Utility is set to Enabled.
	Onboard Devices Configuration
	Run parallel port test
	Printer driver
	Printer cable
	Printer
	Main board
Keyboard/Touchpad-Related Symptoms
Symptom / Error	Action in Sequence
Keyboard (one or more keys) does not	Reconnect the keyboard cable.
work.	Keyboard
	Main board
Touchpad does not work.	Reconnect touch pad cable. Modem port is secured to the
	main board
	Touch pad FPC
	Audio/Touch pad board
	Main board

Chapter 4 80