Removing the Power Board
1.See “Removing the Upper Cover” on page 62.
2.Remove the single screw securing the Power Board to the Lower Cover.
Step | Size | Quantity | Screw Type |
|
|
|
|
Power Board | M2.5*3 | 1 |
|
|
|
|
|
3.Pull the FFC up to remove it from the adhesive securing it to the Speaker Module.
4.Tilt the board 90 degrees to clear the securing tab.
IMPORTANT:The FFC is soldered to the power board. Take care when lifting to minimize bending of the connection, lest breakage occur.
70 | Chapter 3 |
