Removing the Speaker Modules
1.See “Removing the Power Board” on page 70.
2.Remove the four screws securing the Speakers to the Upper Cover.
Step | Size | Quantity | Screw Type |
|
|
|
|
Speaker Module | M2.5*3 | 4 |
|
|
|
|
|
3.Lift the right side speaker out from the Lower Cover and peel back the mylar to expose the speaker wire as shown.
4.Peel back the mylar sheet to expose the speaker cable all the way to the left speaker.
5.Remove the Speaker Cable from the cable channel. Ensure that the cable is free from all cable clips.
72 | Chapter 3 |
