ASRock Z77 Extreme6/TB4 manual Onboard Headers and Connectors

2.13 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA2 Connectors

(SATA2_2_3: see p.2, No. 13)

(SATA2_4_5: see p.2, No. 14)

Serial ATA3 Connectors

(SATA3_A1_A2: see p.2, No. 11)

(SATA3_0_1: see p.2, No. 12)

SATA2 2	SATA2 3
SATA2 4	SATA2 5
SATA3 A1	SATA3 A2
SATA3 0	SATA3 1

These four Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate.

These four Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. If the eSATA3 port on the rear I/O has been connected, the internal SATA3_A2 will not funtion.

English

Serial ATA (SATA)	Either end of the SATA data
Data Cable	cable can be connected to the
(Optional)	SATA / SATA2 / SATA3 hard
	disk or the SATA2 / SATA3
	connector on this motherboard.
USB 2.0 Headers	Besides two default USB 2.0
(9-pin USB2_3)	ports on the I/O panel, there are
(see p.2, No. 25)	three USB 2.0 headers on this
	motherboard. Each USB 2.0
	header can support two USB 2.0
	ports.

36

ASRock Z77 Extreme6/TB4 Motherboard