Asus SABERTOOTH990FXGEN3, 990FX R20 manual Ai Tweaker menu, To change a user password

To change a user password:

1.Select the User Password item and press <Enter>.

2.From the Enter Current Password box, key in the current password, then press <Enter>.

3.From the Create New Password box, key in a new password, then press <Enter>.

4.Confirm the password when prompted.

To clear the user password, follow the same steps as in changing a user password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the User Password item on top of the screen shows Not Installed.

3.4Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction.

The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.

Scroll down to display other BIOS items.

Chapter 3

UEFI BIOS Utility - Advanced Mode

Main	Ai Tweaker	Advanced	Monitor
Current CPU Speed	: 3400MHz
Target CPU Speed	: 3200MHz
Current Memory Frequency : 1333MHz
Current NB Frequency	: 2000MHz
Current HT Link Speed	: 2000MHz

Ai Overclock Tuner	Auto
CPU Ratio	Auto
AMD Turbo CORE technology	Auto
Memory Frequency	Auto
CPU/NB Frequency	Auto
HT Link Speed	Auto
CPU Spread Spectrum	Auto
PCIe Spread Spectrum	Auto
EPU Power Saving Mode	Disabled

Exit

BootTool

[D.O.C.P.] When DOCP is enabled CPU Bus frequency, CPU ratio and memory parameters will be auto optimized.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Shortcut

F5: Optimized Defaults

F10: Save ESC: Exit

F12: Print Screen

Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.

3-8 Chapter 3: BIOS setup