Asus 990FX R20, SABERTOOTH 990FX/GEN3 R2 8 APM, SB HD Azalia Configuration, ErP Ready Disabled

Chapter 3

SB HD Azalia Configuration

The sub-items in this menu allow you to set the SB HD Azalia configuration.

HD Audio Azalia Device [Enabled]

[Enabled]	Enables the HD Audio Device.
[Disabled]	Disables the controller.

The following two items appear only when you set the HD Azalia Audio Device item to [Enabled].

Azalia Front Panel [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports.

[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97

[HD] Sets the front panel audio connector (AAFP) mode to high definition audio.

SPDIF Out Type [SPDIF]
[SPDIF]	Sets to [SPDIF] for SPDIF audio output.
[HDMI]	Sets to [HDMI] for HDMI audio output.

3.5.8APM

UEFI BIOS Utility - Advanced Mode					Exit
Main	Ai Tweaker	Advanced	Monitor	Boot	Tool
Back	Advanced\ APM >
			Disabled	Allow BIOS to switch off some power
ErP Ready
				at S5 to get the system ready for ErP
Restore AC Power Loss			Power Off	requirement. When set to Enabled, all
				other PME options will be switched
Power On By PME Device			Disabled	off.
Power On By Ring			Disabled
Power On By RTC			Disabled

ErP Ready [Disabled]

This item allows user to switch off some power at S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Disabled] [Enabled]

Restore AC Power Loss [Power Off]

[Power On]	The system goes into on state after an AC power loss.
[Power Off]	The system goes into off state after an AC power loss.
[Last State]	The system goes into either off or on state, whatever the system state was
	before the AC power loss.

3-26 Chapter 3: BIOS setup