3.HARDWARE SETUP
3.5System Memory
This motherboard uses only Dual Inline Memory Modules (DIMMs). Two DIMM sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of 16, 32, 64, 128, 256, or 512MB densities for a system memory configuration of 32MB up to 1GB. One side (with memory chips) of the DIMM takes up one row on the motherboard.
Install memory in any combination as follows:DIMM Location | Total Memory | |
Socket 1 (Rows 0&1) | SDRAM 16, 32, 64, 128, 256, 512MB | x1 |
|
|
|
Socket 2 (Rows 2&3) | SDRAM 16, 32, 64, 128, 256, 512MB | x1 |
|
|
|
| Total System Memory (Max. 1GB) | = |
|
|
|
3.5.1 General DIMM Notes
•DIMMs that have more than 18 chips are not supported on this motherboard.
•For the system CPU bus to operate 100 MHz/133MHz, use only
•ASUS motherboards support Serial Presence Detect (SPD) DIMMs. This is the memory of choice for best performance vs. stability.
•SDRAM chips are generally thinner with higher pin density than EDO (Extended Data Output) chips.
•BIOS shows SDRAM memory on bootup screen.
•
WARNING! Make sure that the DIMM you use can handle the specified SDRAM speeds, otherwise the computer will not boot.
System Memory
3. H/W SETUP
ASUS | 19 |