Asus CUVL-VM 11)ATX Power Supply Connector (20-pinblock ATXPWR)

3.HARDWARE SETUP

11)ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power supply fits in only one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that the ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in turning the system ON if the power supply cannot support the load. For Wake-On-LAN support, the ATX power supply must supply at least 720mA +5VSB.

.3 H/WConnectors SETUP

	+12.0		Volts	+5.0 Volts
		+5V Standby		+5.0 Volts
		Power Good		-5.0 Volts
		Ground		Ground
		+5.0	Volts	Ground
		Ground		Ground
	+5.0		Volts	Power Supply On
		Ground		Ground
		+3.3 Volts		-12.0 Volts
CUVL-VM
	+3.3		Volts	+3.3 Volts

CUVL-VM ATX Power Connector

34 ASUS CUVL-VM User’s Manual