.3 H/WConnectors SETUP

3.HARDWARE SETUP

7)Standard Infrared Module Connector (5-pin IR)

This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on a system chassis that supports this feature. You must also configure the setting through UART2 Use Infrared (see 4.4.2 I/O Device Configuration) to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard SIR connector according to the pin definitions.

Front View Back View

IR

+5V

(NC) IRRX

GND IRTX

1

IRTX +5V

GND (NC)

CUVL-VM

IRRX

CUVL-VM Infrared Module Connector

8)USB Header (10-1 pin USBPORT)

If the two external USB ports on the back panel are inadequate, an internal USB header is available for two additional USB ports. Connect a 2-port USB connector set to the USB header, then mount the bracket to an open slot on the chassis. (NOTE: The USB connector set does not come with the motherboard package.)

 

USBPORT

 

 

5

10

 

NC

 

 

GND

GND

 

USBP2+

USBP3+

 

USBP2–

USBP3–

CUVL-VM

USB Power

USB Power

 

1 6

CUVL-VM USB Port

32

ASUS CUVL-VM User’s Manual