Manuals / Brands / Computer Equipment / Network Card / Asus / Computer Equipment / Network Card

Asus CUVL-VM TIP:, NOTES:, ASUS CUVL-VMUser’s Manual, 3)Primary (Blue) / Secondary IDE Connectors (40-1pin IDE1/IDE2)

1 86

Download 86 pages, 2.46 Mb

3.HARDWARE SETUP

3)Primary (Blue) / Secondary IDE Connectors (40-1 pin IDE1/IDE2)

These connectors support the provided UltraDMA/100/66/33 IDE hard disk ribbon cable. Connect the cable’s blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraDMA/100/66/33 slave device (hard disk drive) and the black connector to the UltraDMA/100/66/33 master device. It is recommended that non- UltraDMA/100/66/33 devices be connected to the secondary IDE connector. If you install two hard disks, you must configure the second drive as a slave device by setting its jumper accordingly. Refer to the hard disk documentation for the jumper settings. BIOS supports specific device bootup (see 4.6. Boot Menu). If you have more than two UltraDMA/100/66/33 devices, purchase another UltraDMA/66/33 cable.

NOTES:

1.Pin 20 on each IDE connector is removed to match the covered hole on the UltraDMA cable connector. This prevents incorrect orientation when you connect the cables.

2.The hole near the blue connector on the UltraDMA/66 cable is intentional.

TIP: You may configure two hard disks to be both Masters with two ribbon cables –one for the primary IDE connector and another for the secondary IDE connector.

IMPORTANT: Use only 40-pin 80-conductor IDE cables for UltraDMA/100/66 IDE devices. The UltraDMA/66 cable included in the motherboard package also supports UltraDMA/100 devices.

Connectors

3. H/W SETUP

CUVL-VM

CUVL-VM IDE Connectors

Primary IDE Connector						Secondary IDE Connector






	PIN 1

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

ASUS CUVL-VM User’s Manual

29

Contents

Page ASUS CUVL-VM 1.02 E720 March ASUS CUVL-VMUser’s Manual ASUSTeK COMPUTER INC. (Asia-Pacific) ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) Page Page Page 1.1How This Manual Is Organized 1.2 Item Checklist 2.1ASUS CUVL-VMMotherboard 2.1.1 Specifications Enhanced ACPI and Anti-Boot Virus Protection: Onboard Audio: 2.1.2Performance 2.1.3Intelligence 2.2Motherboard Components 2.2.1Component Locations 3.1Motherboard Layout 3.2Layout Contents 3.3Hardware Setup Procedure 3.4Motherboard Settings Motherboard Features Settings (DIP Switches - SW1) 1)CPU External Frequency Selection (SW1 Switches 1–4) 2)Clear RTC RAM 3.5System Memory 3.5.1 General DIMM Notes 3.5.2Memory Installation 3.6Central Processing Unit (CPU) 3.6.1CPU Installation 3.7Expansion Cards 3.7.1 Installing an Expansion Card 3.7.2Assigning IRQs for Expansion Cards 3.8Connectors 3.8.1External Connectors 4)Parallel Port Connector (Burgundy 25-pinPRINTER) Onboard Parallel Port 4.4.2 I/O Device Configuration) NOTE 5)Serial Port Connector (Teal/Turquoise 9-pinCOM1) 7)Game/MIDI Connector (Gold 15-pinGAME_AUDIO) (optional) 8)Audio Connectors (Three 1/8” AUDIO) (optional) Line Out Line In Mic 3.8.2Internal Connectors 3)Primary (Blue) / Secondary IDE Connectors (40-1pin IDE1/IDE2) NOTES: TIP: 4)Wake-On-LANConnector (3-pinWOL_CON) 4.5.1 Power Up Control 5)Wake-On-RingConnector (2-pinWOR) CPU Fan, Power Supply Fan, and Chassis Fan Connectors 6. SOFTWARE REFERENCE do not place jumper caps over these pins 7)Standard Infrared Module Connector (5-pinIR) 8)USB Header (10-1pin USBPORT) 10)Serial Port 2 Connector (10-1pin COM2) 11)ATX Power Supply Connector (20-pinblock ATXPWR) 12)System Power LED Lead (3-1pin PWR.LED) 13)System Warning Speaker Lead (4-pinSPEAKER) 14)System Management Interrupt Lead (2-pinSMI) 15)ATX Power Switch / Soft-OffSwitch Lead (2-pinPWR.SW) 16)Reset Switch Lead (2-pinRESET) 3.9Starting Up the First Time 4.1Managing and Updating Your BIOS 4.1.1 Upon First Use of the Computer System 1. Save Current BIOS to File Save Current BIOS To File A:\XXX-XX.XXX SETUP BIOS 4.1.2Updating BIOS Procedures Page 4.2BIOS Setup Program 4.2.1BIOS Menu Bar 4.2.2 Legend Bar General Help Saving Changes and Exiting the Setup Program Scroll Bar Sub-Menu 4.3Main Menu 4.3.1Primary & Secondary Master/Slave [User Type HDD] Translation Method [LBA] Cylinders Type Translation Method Head Sector CHS Capacity Maximum LBA Capacity Multi-SectorTransfers [Maximum] 4.3.2 Keyboard Features Language [English] Supervisor Password [Disabled] / User Password [Disabled] A Note about Passwords Forgot the Password 3.4 Motherboard Settings 4.4Advanced Menu USB Legacy Support [Auto] OS/2 Onboard Memory > 64M [Disabled] 4.4.1Chip Configuration SDRAM Active to Precharge Time [6T] SDRAM Data Driving Strength [Auto] Read Around Write [Enabled] CPU-DRAM Back-BackTransaction [Enabled] Delayed Transaction [Disabled] AGP Drive Strength [Auto] Graphics Aperture Size [64MB] On-ChipVGA Shared Memory Size [8MB] Video Memory Cache Mode [UC] Onboard PCI IDE Enable [Both] 4.4.2I/O Device Configuration Parallel Port Mode [ECP+EPP] ECP DMA Select [3] ECP Parallel Port Mode Onboard Peripheral Resource Control 4.4.3PCI Configuration 4.4.4 Shadow Configuration 4.5Power Menu Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] Suspend Mode [Disabled] PWR Button < 4 Secs [Soft Off] 4.5.1Power Up Control 4.5.2 Hardware Monitor 4.6Boot Menu Boot Sequence Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Disabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] 4.7Exit Menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Page 5.1Operating Systems 5.1.1 Windows 98 First Time Installation 5.2 CUVL-VMMotherboard Support CD 5.2.1 Installation Menus 5.2.2 Applications SETUP S/W RealTek RTL8139C PCI Fast Ethernet NIC Driver: Intel LDCM 6.10.0.17 Administrator Setup: Intel LDCM 6.10.0.17 Client Setup: ASUS BIOS Flash Utility for LDCM 6.10.0.17: 6.1ASUS PC Probe 6.1.1 Starting ASUS PC Probe 6.1.2Using ASUS PC Probe Settings History Fan Control Information Hard Drives Memory Device Summary DMI Explorer Utility Execute Program 6.1.3ASUS PC Probe Task Bar Icon Page 7.1PCI-L101Fast Ethernet Card 7.1.1 Features 7.1.2 Software Driver Support 7.1.3 Question and Answer 7.2 Glossary Boot Bus Master IDE Byte (Binary Term) COM Port Concurrent PCI LPT Port (Line Printer Port) MMX OnNow PC100 PCI Bus (Peripheral Component Interconnect Local Bus) ROM (Read Only Memory) SCSI (Small Computer System Interface) SDRAM (Synchronous DRAM) SPD for SDRAM module SSE (Streaming SIMD Extensions)