SATA Express(SATAEXPRESS_1) and M.2 Configuration [Auto]
[Auto] | The system will automatically detect the connected SATA Express or M.2 |
| devices and set a higher priority for M.2 that SATA Express interface. The |
| connected device will then run at |
| SATA devices are available when no SATA Express or M.2 devices are |
| installed. |
[SATA Express] | The bandwidth will be assigned to SATA Express(SATAEXPRESS_1) for |
| |
[M.2] | The bandwidth will be assigned to M.2 for |
| Express(SATAEXPRESS_1) disabled. |
SATA Mode Selection [AHCI]
This item allows you to set the SATA configuration.
[Disabled] | Disables the SATA function. |
[IDE] | Set to [IDE] when you want to use the Serial ATA hard disk drives as |
| Parallel ATA physical storage devices. |
[AHCI] | Set to [AHCI] when you want the SATA hard disk drives to use the AHCI |
| (Advanced Host Controller Interface). The AHCI allows the onboard storage |
| driver to enable advanced Serial ATA features that increases storage |
| performance on random workloads by allowing the drive to internally |
| optimize the order of commands. |
[RAID] | Set to [RAID] when you want to create a RAID configuration from the SATA |
| hard disk drives. |
|
|
| The following item appears only when you set the SATA Mode Selection to [RAID]. |
|
|
Alternate ID [Disabled]
This item allows you to enable or disable Report alternate ID.
Configuration options: [Disabled] [Enabled]
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better energy saving conditions. When set to [Enabled], the hot plug function of SATA ports are disabled.
Configuration options: [Disabled] [Enabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T.
Configuration options: [On] [Off] | 3 |
| Chapter |
ASUS MAXIMUS VII FORMULA |