3.6.8APM Configuration
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss [Power Off]
[Power Off] | The system goes into OFF state after an AC power loss. |
[Power On] | The system goes into ON state after an AC power loss. |
[Last State] | The system goes into either OFF or ON state, whatever the system state |
| was before the AC power loss. |
Power On By
[Disabled] | Disables the PCIE/PCI devices to generate a |
| Intel® device or other installed PCIE LAN devices. |
[Enabled] | Enables the PCIE devices to generate a |
| LAN devices. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | Generates a wake event and configure the |
| date. |
3 Chapter
Chapter 3: BIOS setup |