Boot Logo Display [Disabled]

[Auto]

Auto adjustments for Windows requirements.

[Full Screen]

Maximize the boot logo size.

[Disabled]

Hid the logo during POST.

The following items appears only when you set the Boot Logo Display item to [Disabled].

Post Report [5 sec]

This item This item allows you to select a desired waiting time of the POST report from 0 to 10 seconds or until <ESC> is pressed.

The following items appears only when you set the Boot Logo Display item to [Full Screen] or [Auto].

Post Delay Time [3 sec]

This item This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.

This feature only works when set under normal boot.

Boot up NumLock State [Enabled]

[Enabled]

Set the power-on state of the NumLock to [On].

[Disabled]

Set the power-on state of the NumLock to [Off].

Wait For ‘F1’ If Error [Enabled]

Enable this item for the system to pause until the F1 key is pressed when any error occurs. Configuration options: [Disabled] [Enabled]

Option ROM Messages [Enabled]

[Enabled]

The Option ROM Messages will be shown during the POST.

[Disabled]

Only the ASUS logo will be shown during the POST.

Interrupt 19 Capture [Disabled]

Enable this item to allow the option ROMs to trap the interrupt 19. Configuration options: [Enabled] [Disabled]

Above 4G Decoding [Disabled]

This item enables or disables 64-bit capable devices to be decoded in above 4G address space if your system supports 64-bit PCI Decoding. Configuration options: [Enabled] [Disabled]

Setup Mode [Advanced Mode]

[Advanced Mode]

This item allows you to go to Advanced Mode of the BIOS after POST.

[EZ Mode]

This item allows you to go to EZ Mode of the BIOS after POST.

Chapter 3

ASUS MAXIMUS VII FORMULA

3-49