USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer is off, in sleep mode, or in hibernate mode.

Before using USB Charger+, ensure to disable the ErP Ready item in the BIOS. To do this, go to Advanced > APM > ErP Ready in the Advanced mode then set this item to [Disabled].

USB Charger+ is available only in selected motherboard models.

Launching USB Charger+

To launch USB Charger+, click or tap on the top-right corner of the AI Suite 3 main menu, then select USB Charger+.

Using USB Charger+

Click or tap to select the type of USB device that you wish to charge when the system is off

Click or tap to refresh the list

Click or tap to apply the settings

Click or tap to discard the settings

Ensure to connect your USB device into the USB port that supports this utility. Refer to the Rear I/O connection section of this user guide for more details.

• USB Charger+ does not support USB hubs, USB extension cables, and generic USB cables.

•USB Charger+ may not recognize some ASUS devices due to varying design.

4 Chapter

4-18

Chapter 4: Software support