Using the Wake-on-LAN

If you want to wake up your computer using the smart device, ensure that you enable the computer’s Wake-on-LAN settings.

To configure your computer’s Wake-on-LAN settings:

1.From BIOS Setup, go to Advanced > APM Configuration then set Power On By PCI-E/PCIto [Enabled].

2.From Windows® OS, do the following:

a.On your desktop, click Start, right-click Computer > Manage to launch the Computer Management screen.

b.Click Device Manager to view all the installed devices.

c.Click Network Adapters, right-click the installed module card (Broadcom or Atheros) then click Properties > Power Management tab.

d.Tick these items Allow this device to wake up the computer and Only allow a magic packet to wake the computer.

For 802.11ac standard Wi-Fi GO! Card, the Wake-on-LAN function will be supported in the later version for Windows® 8 operating system.

4 Chapter

4-28

Chapter 4: Software support