Asus M2R-FVM manual Internal connectors, Audio 2, 4, 6 or 8-channel configuration

Refer to the audio configuration table below for the function of the audio ports in 2, 4, or 6-channel configuration.

Audio 2, 4, 6 or 8-channel configuration

Port	2-channel	4-channel	6-channel	8-channel
	(Headset)
Light Blue	Line In	Line In	Line In	Line In
Lime	Line Out	Front Speaker Out	Front Speaker Out	Front Speaker Out
Pink	Mic In	Mic In	Mic In	Mic In
Orange	—	Center /Subwoofer	Rear Speaker Out	Center/Subwoofer
Black	—	—	—	Rear Speaker Out
Gray	—	—	Side speaker out	Side speaker out

9.USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

10.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.

11.SPDIF port. This port connectors an external audio output device via a S/PDIF cable.

12.VGA port. This 15-pin VGA port connects to a VGA monitor.

13.Serial connector. This 9-pin COM1 port is for serial devices.SPDIF port.

1.10.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.

M2R-FVM

FLOPPY

NOTE: Orient the red markings on PIN 1 the floppy ribbon cable to PIN 1.

M2R-FVM Floppy Disk Drive Connector

1-24 Chapter 1: Product introduction