Asus P5GD2 manual Auto-configuring a RAID array, Setup Array Type as

3.At the bottom of the screen are the navigation keys. These keys allow you to move through and select from the menu options.

[1]..[5] Select [ESC] Exit

4.Press the number of your selection or <Esc> to exit.

Auto-configuring a RAID array

This option allows you to select a supported RAID set for the utility to automatically configure.

To auto-configure a RAID set:

1.From the IT8212 Setup Utility screen, press <1>. The following screen appears.

IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc. [ Auto Configuration Menu ]

Setup Array Type as:	RAID 0
[ Array Configuration ]
RAID Mode	Stripe
Un-used Drive(s)	4
Drive(s) in Array	0
Array Capacity (size in MB)	8056

[→ ,← ,Space] Change Option [CTRL-Y] Save [ESC] Exit

2.Use the left or right arrow keys or the space bar to select a RAID set. As you select an option, the screen displays the array configuration of the RAID based on the number of IDE devices installed.

3.Press <Ctrl+Y> to save your RAID set.

4.Press <Esc> to exit.

5 - 32 Chapter 5: Software support