Asus P5GD2 manual Viewing your RAID configuration

3.Use the up or down arrow keys to select a drive, then press <Enter>. Follow succeeding screen instructions.

4.Press <Esc> to exit.

Viewing your RAID configuration

This option allows you to view your RAID configuration. You can also enable or disable the Auto-rebuild function in this section.

To view your RAID configuration:

1.From the IT8212 Setup Utility screen, press <5>. The following screen appears.

IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.

				[ RAID Card Configuration ]
		Auto-Rebuild:						Enable
					[ RAID Card Resource ]
	Channel 0		Interrupt: B					I/P Port: 0000AC00
	Channel 1		Interrupt: B					I/P Port: 0000A800
						[ Drive Status ]
Channel									Size		Drive
	ID	Drive Name							(MB)	Array No	Mode
Pri/D0		XXXXXXXXXXXXXX							XXXXXX	Array 0	U5
Pri/D1		XXXXXXXXXXXXXX							XXXXXX	Array 0	U2
Sec/D0		XXXXXXXXXXXXXX							XXXXXX	Array 0	U4
Sec/D1		XXXXXXXXXXXXXX							XXXXXX	Array 0	U6
∗	: Capacity (GB)						Drive Mode: P = PIO, D = DMA, U = UDMA
[→	,← ,Space] Change Option									[ESC] Exit

3.Use the left or right keys or the space bar enable or disable the Auto-rebuilditem.

4.Press <Esc> to exit.

5 - 36 Chapter 5: Software support