Asus P5GD2 manual Rebuilding a RAID array

Rebuilding a RAID array

This option allows you to reconstruct an existing RAID array. This option applies only to RAID1 (Mirrored) or RAID 0+1(Striped+Mirrored) sets.

To rebuild a RAID array:

1.From the IT8212 Setup Utility screen, press <4>. The following screen appears.

IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.

[ Rebuild RAID Menu ]

Array No		Array Mode	Drive No	Size(MB)	Status
Array 0		Stripe	4	XXXXXX	Functional
Array 1		Mirror	2	XXXX	Functional
Array	2	----	----	-----	-----
Array	3	----	----	-----	-----

∗ : Capacity (GB)		♦	: Bootable Array
[↑ ] Up	[↓ ] Down	[Enter] Select	[ESC] Exit

2.Use the up or down arrow keys to select a RAID array, then press <Enter> to rebuild. The following screen appears.

IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.

			[ Source Drive ]
Channel ID		Drive Name			Size (MB)
	Pri/D1	XXXXXXXXXX			XXXXX
				[ Target Drive ]
Channel ID		Drive Name			Size (MB)
	Sec/D1	XXXXXXXXXX			XXXXX
				[ Drive List]
Channel ID		Drive Name			Size (MB)
	Pri/D1	XXXXXXXXXX			XXXXX
	Sec/D1	XXXXXXXXXX			XXXXXX

∗: Capacity (GB)

[↑ ] Up [↓ ] Down [Enter] Select [ESC] Exit

ASUS P5GD2 Deluxe 5 - 35