Windows® 2000 environment

To create a set of boot disks for Windows® 2000:

a.Insert a formatted, high density 1.44 MB floppy disk into the drive.

b.Insert the Windows® 2000 CD to the optical drive.

c.Click Start, then select Run.

d.In the Open field, type D:\bootdisk\makeboot a: assuming that D: is your optical drive.

e.Press <Enter>, then follow screen instructions to continue.

2.Copy the original or the latest motherboard BIOS file to the bootable floppy disk.

4.1.2 AFUDOS utility

The AFUDOS utility allows you to update the BIOS file in DOS environment using a bootable floppy disk with the updated BIOS file. This utility also allows you to copy the current BIOS file that you can use as backup when the BIOS fails or gets corrupted during the updating process.

Copying the current BIOS

To copy the current BIOS file using the AFUDOS utility:

Make sure that the floppy disk is not write-protected and has at least 1.2 MB free space to save the file.

The succeeding BIOS screens are for reference only. The actual BIOS screen displays may not be same as what’s shown here.

1.Copy the AFUDOS utility (afudos.exe) from the motherboard support

CD to the bootable floppy disk you created earlier.

2.Boot the system in DOS mode, then at the prompt type: afudos /o[filename]

where the [filename] is any user-assigned filename with not more than eight alphanumeric characters for the main filename and three alphanumeric characters for the extension name.

A:\>afudos /oOLDBIOS1.ROM

Main filename Extension name

4-

Chapter 4: BIOS setup

Page 60
Image 60
Asus P5L 1394 manual Afudos utility, Copying the current Bios, Windows 2000 environment