Rebuilding a hard disk drive

ASUS EZ-Backup will rebuild a RAID 1 set after a failed hard disk drive is replaced with a functioning HDD, or the mirror becomes unsynchronized when a working hard disk drive is removed, then returned.

This function applies only to a RAID 1 (SAFE) set.

The following message pops up when a hard disk drive is unplugged:

To rebuild:

1.Plug in the Serial ATA cable to the available EZ_RAID connector.

2.Rebuilding starts.

The Box Status cell displays the rebuilding progress.

Note that the box is colored orange.

3.When done, the following message pops up. Click OK

ASUS P5W DH Deluxe

5-59