2.7.2Internal connectors

1.Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

P5W DH DELUXE

FLOPPY

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

PIN 1

P5W DH DELUXE Floppy disk drive connector2.JMicron® IDE connector (40-1 pin PRI_EIDE [black])

This connector is for Ultra ATA 133/100/66 signal cables. The JMicron® IDE connector supports up to two IDE hard disk drives for easier data storage.

P5W DH DELUXE

PRI_EIDE

PIN 1

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

P5W DH DELUXE IDE connector

This connector does not support ATAPI devices.

ASUS P5W DH Deluxe

2-31