5.Insert the floppy disk into the floppy disk drive when prompted.

6.Follow the screen instructions to complete the process.

B. NetWare 5.1/6.0 Installations1.From the NetWare console, type NWCONFIG or Load Install and press <Enter>.

2.From the Configuration Options screen, choose Driver options and press <Enter>.

3.Choose Configure network drivers and press <Enter>. If any drivers are already loaded, a list of them appears.

4.Choose Load an additional driver and press <Enter>. A list of drivers appears.

5.Insert the Intel CD or floppy disk you've created and choose Install an unlisted driver by pressing <Insert>.

6.If you're using a floppy disk, insert the disk in drive A and

press <Enter>. If you've mounted the CD as a NetWare volume, press <F3> and enter the source path (CD volume).

5-34

Chapter 5: Driver installation