16.System panel connector (20-pin PANEL)

This connector accommodates several system front panel functions.

Keyboard Lock

Power LED

+5 V

PLED Keylock Ground

11

Speaker Connector

+5V IDELED+ IDELED- Speaker

20

1

MLED

+5 V

MessageLED

PR-DLS533

PR-DLS533 System Panel Connectors

 

10

PWR Ground

Reset Ground

Reset SW

ATX Power

Switch*

System Power LED Lead (3-1 pin PLED)

This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

System Message LED Lead (2-pin MLED)

This 2-pin connector is for the system message LED that indicates receipt of messages from a fax/modem. The normal status for this LED is OFF, when there is no incoming data signal. The LED blinks when data is received. The system message LED feature requires an ACPI OS and driver support.

System Warning Speaker Lead (4-pin SPEAKER) This 4-pin connector is for a chassis-mounted speaker.

ATX Power Switch / Soft-Off Switch Lead (2-pin PWR)

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF.

Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.

Keylock Lead (2-pin KEYLOCK)

This lead connects to a chassis-mounted switch to allow use of the keyboard lock feature.

ASUS PR-DLS533 motherboard user guide

2-27