11.IPMI connector (4-pin IPMI)

The Intelligent Platform Management Interface (IPMI) connector is for the ASMC card. Connect the 4-pin ASMC interface cable to this connector.

NC

IPMICLK

GND

IPMIDATA

PR-DLS533

PR-DLS533 IPMI Connector

12.Wake-On-LAN Connector (3-pin WOL_CON)

This connector supports a LAN card with a Wake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

Ground

PR-DLS533

PME +5 Volt Standby

PR-DLS533 Wake-On-LAN Connector

2-24

Chapter 2: Hardware information