14.Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On- Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card.

For external modems, Wake-On-Ring is detected through the COM port.

WOR

1 2

Ground Ring#

PR-DLS533

PR-DLS533 Wake-On-Ring Connector

15.Hard disk activity LED (2-pin IDELED)

This connector supplies power to the hard disk activity LED. The read or write activities of any device connected to the primary or secondary IDE connector cause this LED to light up.

PR-DLS533

PR-DLS533 IDE Activity LED

IDELED

- +

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

2-26

Chapter 2: Hardware information