2.The dd image is located in the zipped file you downloaded from the LSI Logic web site.

3.RAWRITE3.COM is included within the zipped file you downloaded from the LSI Logic web site.

After the image has been copied to a 3.5 diskette, use this HBA diskette for UnixWare installations as instructed.

B. New System Installation

1.Boot the computer using the installation diskettes or the installation CDROMs delivered in the UnixWare Operating System media kit.

2.Follow the instructions on the screen.

3.Insert the mpt driver diskette when prompted to insert a host adapter diskette.

The system loads the required drivers, such as mpt, and indicates when they are loaded. At the end of the installation, you will see a prompt to reinsert the HBA driver diskette.

4.Insert the mpt driver diskette and press Enter. The kernel builds and the installation terminates.

6.Remove the driver diskette when prompted to do so and reboot the system.

C. Existing System Installation

Before you install the mpt driver, make a backup copy of the existing kernel. The backup and installation procedures follow.

1.Log on as root.2.At the shell prompt type:cp /stand/unix /stand/unix.safe

Use this copy of the old kernel to reboot the system if the driver installation fails. Refer to the section titled Troubleshooting for more information.

3.Once the old kernel is saved, insert the mpt UnixWare driver diskette.4.Load the driver using the pkgadd command by typing:pkgadd -d diskette1

ASUS PR-DLS533 motherboard user guide

5-45