Asus T2-AH1 2.6.1Memory configurations, 2.6Installing a DIMM

2.6Installing a DIMM

The system motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets.

The following figure illustrates the location of the sockets:

Æ

184-pin DDR DIMM sockets

2.6.1Memory configurations

DIMM B1 DIMM A1

80 Pins 104 Pins

You may install up to 2 GB system memory using 256 MB, 512 MB, and 1 GB DDR DIMMs.

• Installing DDR DIMMS other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in the table on the next page.

•Install only identical (the same type and size) DDR DIMM in DIMM_A1 and DIMM_B1.

•If installing only one DDR DIMM, install it in DIMM_A1 (blue slot).

•Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.

•Due to chipset resource allocation, the system may detect less than your total system memory size when you enable the onboard VGA.

•This motherboard does not support memory modules made up of 128 Mb chips or double-sided x16 memory modules.

ASUS T2-AH1 2 - 9