2.8Installing an optical drive

The barebone system comes with two 5.25-inch drive bays for two optical drives.

• You may install a second optical drive only if you installed a Serial ATA hard disk drive.

•Set your second optical drive as Slave device before connecting the IDE cable and power plug. Refer to the optical drive documentation on how to set the drive as a Slave device.

To install an optical drive:

1.Place the chassis upright.

2.

Locate the front panel cover

3

3

 

hooks.

 

 

 

 

 

3.

To remove the front panel cover

1

 

 

from the chassis, press the top

 

2

 

hooks downward and the

 

 

 

bottom hooks upward to release

 

 

 

them from the metal tabs that

3

 

 

secure them in place.

3

 

 

4.

Detach the front panel cover

 

 

 

top hooks.

4

 

4

5.Slightly push the front panel

cover outward until it detaches from the chassis, then set it aside.

5

ASUS T2-AH1

2 - 17