7 . IDE connector (40-1 pin IDE)

This connector is for an Ultra DMA 100/66 signal cable. The Ultra DMA 100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and a gray connector for an Ultra DMA 100/66 IDE master device (hard disk drive). Refer to the hard disk documentation for the jumper settings.

• Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable.

•Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.

Æ

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

IDE

PIN 1

IDE connector

8 . Internal audio connectors (4-pin AUX, CD)

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card.

Æ

Internal audio connectors

AUX CD (White) (Black)

Channel

Ground

Channel

Channel

Ground

Channel

Right Audio

 

Left Audio

Right Audio

 

Left Audio

ASUS T2-AH1

4 - 7