Asus T2-AH1 Memory Timing Configuration

Memory Timing Configuration

Memory Timing Configuration

Memclock Mode	[Auto]
MCT Timing Mode	[Auto]
User Config Mode	[Auto]
Burst Length	[4 Beats]
Hardware Memory Hole	[Disabled]

MEMCLCK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.

Memclock Mode [Auto]

Choose [Auto] to allow the BIOS to automatically set the Real Memory Clock Mode. Choose [Limit] to set using one of the standard values. Configuration options: [Auto] [Limit]

Memclock Value [100 MHz]

This item appears only if the Memclock Mode item is set to [Limit]. Configuration options: [100 MHz] [133 MHz] [166 MHz] [183 MHz] [200 MHz] [216 MHz] [233 MHz] [250 MHz]

MCT Timing Mode [Auto]

Allows you to set the MCT timing mode.

Configuration options: [Auto] [Manual]

User Config Mode [Auto]

Allows you to set the user config mode.

Configuration options: [Auto] [Manual]

Burst Length [4 Beats]

Allows you to set the burst length.

Configuration options: [8 Beats] [4 Beats] [2 Beats]

Hardware Memory Hole [Disabled]

Allows you to enable or disable remapping around the memory hole. This feature is supported only on REV EO or later processors. Configuration options: [Disabled] [Enabled]

5 - 20 Chapter 5: BIOS setup