2.10Installing a hard disk drive (HDD)

The system supports one Ultra ATA/133 IDE or one Serial ATA hard disk drive.

To install an IDE hard disk drive:

1.Locate the HDD tray lock screw

on the other side of the chassis.

2. Remove the lock screw with a Philips screw driver. Keep the screw for later use.

1

2

3.Slide the HDD tray outward until the tray slots are released from

the chassis hooks.

Tra y locks

 

 

3

Loc k slots

Tra y locks

4. Place a hard disk drive on the

tray with its bottom on the

5

open side. Align the HDD and

4

HDD tray screw holes.

 

5.Secure the HDD with four

screws.

5

Configure your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as a Master device.

ASUS T2-AH1

2 - 21