8

 

9

 

1

 

7

Power supply unit plugs

2

 

7.Connect the 4-pin power plug to the power connector of the floppy disk drive.

8.Connect the 4-pin power plug to the power connector of the IDE hard disk.

9.Connect the 4-pin power plug to the power connector of the optical drive.

See the Appendix for the power supply specifications.

Voltage selector

The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area.

If the voltage supply in your area is 100-127 V, set the switch to 115 V.

If the voltage supply in your area is 200-240 V, set the switch to 230 V.

Setting the switch to 115 V in a 230 V environment will seriously damage the system!

ASUS T2-AH1

2 - 25