2.11Reinstalling the power supply unit

Reinstall the power supply unit (PSU) after installing the system components and reconnecting the cables, .

To reinstall the PSU:

1.Connect the 4-pin 12 V power plug to the ATX12V connector on the motherboard.

2.Connect the 24-pin ATX power plug to the ATXPWR connector on the motherboard. See page 4-6 for the location of power connectors.

2

1

3.Position the PSU over the chassis.

4. Align the PSU side hook with the

4

3

metal slot located on the side of the optical drive bay.

5. Slide the PSU toward the direction of the rear panel until it fits in place.

5

6.Secure the PSU with the screw you removed earlier.

Make sure the PSU cables do not interfere with the CPU and/or chassis fans.

6

2 - 24

Chapter 2: Basic installation