![](/images/backgrounds/166676/166676-12034x1.png)
8.Connect a power cable from the power supply unit to the
power connector at the back of | 8 |
the optical drive. See page 38 | |
for details. |
|
10 | 9 |
9. Connect one end of the IDE
ribbon cable to the IDE interface at the back of the
optical drive, matching the red stripe on the cable with Pin 1 on the IDE interface.
10.Connect one end of the optical drive audio cable to the
11.Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard. See page 76 for the location of the secondary IDE connector.
12.Connect the other end of the audio cable to the
13.
by aligning its hooks with the chassi holes.
On Deluxe models,
the LED panel and the front
13 audio button panel cables to
their respective connectors before
panel cover.
14. Lock the front panel cover hooks to the chassis holes as indicated.
14
34 | Chapter 2: Basic installation |