2.10 Re-installing the power supply unit

Re-install the power supply unit (PSU) after installing the system components and reconnecting the cables.

To reinstall the PSU:

1.Connect the 4-pin 12V and the 20-pin ATX power plugs to the ATX12V and ATXPWR connectors, respectively. See page 77 for the location of these connectors.

2.Position the PSU over the chassis.

1

1

3

3. Align the PSU side hook with the

metal slot on the side of the optical drive bay.

2

4. Slide the PSU toward the direction of the rear panel until it fits in place.

4

5.Secure the PSU with the screw you removed earlier.

Make sure the PSU cables do not interfere with the CPU and/or chassis fans.

5

ASUS Terminator 2 barebone system

37