![](/images/backgrounds/166676/166676-12077x1.png)
This connector supports the provided floppy drive ribbon cable. Connect one end of the cable to the motherboard, then connect the other end to the floppy disk drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).
FLOPPY
®P4R8T
PIN 1
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
P4R8T Floppy Disk Drive Connector
8.ATX power connectorsThese connectors are for the
ATXPWR +12.0Volts +5.0 Volts
+5V Standby +5.0 Volts
Power Good
Ground Ground
+5.0 Volts Ground Ground
Ground
+5.0 Volts Power Supply On
Ground Ground
+3.3 Volts
+3.3 Volts +3.3Volts
ATX12V +12V DC COM
®P4R8T
P4R8T ATX Power Connector
+12V DC COM
ASUS Terminator 2 barebone system | 77 |