![](/images/backgrounds/166676/166676-12027x1.png)
2.5.3 Re-installing the CPU fan and heatsink assembly
To
1.Position the CPU fan and
heatsink assembly on top of the installed CPU.
1
2.Align the retention bracket with
the rails on the side of the CPU fan.
3. Attach the retention bracket
hook into the retention module2
3
hole.
4. Carefully press down the | 4 | |
locking lever on the other side | ||
| ||
of the retention bracket. |
|
5. Attach the locking lever hook
7
into the retention module hole 5 to secure the fan and heatsink
assembly in place.
6.Follow steps 2 to 5 to
7.Connect the CPU fan cable to the CPU fan connector on the motherboard.
Do not forget to connect the CPU fan connector! Hardware monitoring errors might occur if you fail to plug this connector.
ASUS Terminator 2 barebone system | 27 |