![](/images/backgrounds/166676/166676-12035x1.png)
2.9 Installing a hard disk drive
The system supports one UltraATA133 IDE hard disk drive (HDD).
To install a hard disk drive:
1.Locate the HDD tray lock screw
on the other side of the chassis.
2. Remove the lock screw with a Philips screw driver. Keep the screw for later use.
1
2
3.Slide the HDD tray outward until
its slots are released from the |
|
chassis hooks. | Tray locks |
| |
| 3 |
Lock slots
Tray locks
4. Place a hard disk drive on the |
| |
tray with its bottom on the open | 5 | |
side. Align the HDD and HDD | 4 | |
tray screw holes. | ||
|
5. Secure the HDD with four screws.
5
Configure your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as a Master device.
ASUS Terminator 2 barebone system | 35 |