6.Re-install the HDD tray and HDD inside the chassis by

loching the tray slots to the chassis hooks.

7. Secure the tray with the screw

6

7

you removed earlier .

 

8.Connect one end of the 40-pin

IDE cable to the IDE connector on the drive.

9. Connect a 4-pin power plug from the power supply unit to the HDD power connector.

10. Connect the other end of the IDE ribbon cable to the primary IDE connector (blue connector labeled PRI_IDE) on the motherboard. See page 76 for the location of the primary IDE connector.

8

9

36

Chapter 2: Basic installation