Feature setup
Feature setup
1.To enter feature setup mode, press and hold SETUP until the system announces “Voice is...”
2.Press SETUP repeatedly to hear each feature.
3.When you hear the feature you want to modify, press ANNC/SKIP or MEMO/REPEAT to change the setting.
4.Press PLAY/STOP to exit feature setup. The new settings will be saved.
When any feature is on, the message window displays 
.
When any feature is off, the message window displays 
.
Feature summary |
| |
FEATURE | SYSTEM | OPTIONS |
| ANNOUNCE |
|
LANGUAGE | “Voice is…” | • Choose English to have the system announce |
|
| voice prompts in English. |
|
| Choose Francais to have the system announce |
|
| voice prompts in French. |
|
| • During setup, the message window will display |
|
| the current language setting (E for English and |
|
| F for French). |
|
|
|
RING SELECT | “Number of ring is…” | • Choose the number of times the telephone will |
|
| ring before the system answers a call. You can |
|
| set it between 2 and 7 rings, toll saver 2/4 or |
|
| toll saver 4/6. |
|
| • When set to toll saver 2/4, the system |
|
| answers after four rings when there are no |
|
| new messages, and after two rings when there |
|
| are new messages. Toll saver 4/6 causes the |
|
| system to answer after six rings when there |
|
| are no new messages and after four rings |
|
| when there are new messages. |
|
| • D uring setup, the message window will |
|
| display the number of rings (8 for toll saver |
|
| 2/4, or 9 for toll saver 4/6). |
|
|
|
REMOTE | “Remote access code is…” | • Change the remote access code to any three |
ACCESS CODE |
| digit number between 500 and 999. |
|
| • The remote access code is preset to 500 and |
|
| allows you to access many features of this |
|
| answering system remotely from a touch tone |
|
| telephone. |
|
| • The three digits of the remote access code are |
|
| set separately. The system will prompt you to |
|
| set the second and third digits after setting the |
|
| first digit. See Feature setup, above. |
