Operation
Store number
When this feature is on, the system will announce the caller’s number before playing back a message.
Accept blocked calls
When this feature is turned off, the system will respond to blocked calls (from callers who have chosen to block their numbers from identification) with the
Message window
The message window displays the total number of messages recorded. If there are more than nine messages recorded, the message window displays the first digit, second digit and dash alternatively. If the message window displays F, then the memory is full and some messages must be deleted before new messages can be recorded.
New message indicator
The ON/OFF light blinks when there are new messages.
Listen to incoming messages
When the system plays incoming messages, the message window displays the number of the message playing. Before playing each message, the system announces the day and time the message was received. If the clock wasn’t set when the message was recorded, or there was a power failure after it was set, the sytem will announce “Power failure” after the time and day. After playing the last message, the system announces “End of messages.” If you want the system to answer a call when you are playing message, press PLAY/STOP to end message playback.
Play messages — Press PLAY/STOP. If there are new messages, they will be played. If there are no new messages, the old messages will be played. If there are no messages in memory, the system announces “No messages.”
Play message at half speed — Press and hold MEMO/REPEAT while the message is playing. Play message twice as fast — Press and hold ANNC/SKIP while the message is playing. Repeat entire message — Press MEMO/
REPEAT.
Repeat previous message — Press MEMO/ REPEAT twice, continue this process to listen to other previous messages.
Skip to next message — Press ANNC/SKIP. Stop message playback — Press PLAY/STOP.
Save messages
The system automatically saves all incoming messages if you do not delete them. The system can save approximately 40 minutes of messages, including the outgoing announcement, for a total of up to 99 messages. When the memory is full, some messages must be deleted before new messages can be recorded.
Memory monitor
To determine the system’s remaining recording time:
1.If the system is on, press ON/OFF to turn the system off.
2.Press ON/OFF again to turn the system on. The system announces the remaining recording time in minutes. (If less than five minutes remain, the system announces “The machine is on. Less than five minutes to record.”)
