AT&T 1740 user manual Feature System Options Announcement

Feature setup

3.To stop recording, press PLAY/STOP. The system automatically plays back the recorded outgoing announcement.

To review your announcement, press ANNOUNCE/SKIP. The system announces, “Announcement. Press ANNOUNCE to record or press PLAY to play.” Press

PLAY/STOP and the system plays the announcement.

To erase your own recorded announcement, press X/DELETE while the announcement is playing. Calls are then answered with the default announcement.

Feature setup

1.To enter the feature setup mode, press SETUP until the system announces, “Language is... To change the setting, press SKIP or REPEAT. To accept and continue setup, press SETUP.”

2.Press SETUP repeatedly until you hear the desired feature.

3.When you hear the feature you want to modify, press ANNOUNCE/SKIP or

MEMO/REPEAT to scroll through the setting’s options.

4.Press SETUP to save and continue setup.

-OR-

Press PLAY/STOP to save the setting and exit feature setup.-

Feature summary
FEATURE	SYSTEM	OPTIONS
	ANNOUNCEMENT
Language	“Language is...”	• You may choose English or Español
		(Spanish) for the voice prompts used by the
		system.
		• During setup, the message window displays
		the current language setting (En for English
		or SP for Spanish)
Ring select	“Number of rings...”	• Choose the number of rings before the
		system answers a call. You can set it
		between two and seven rings, toll saver 2/4
		or toll saver 4/6.
		• When the toll saver is set as 2/4, the
		system will answer after two rings if there
		are new messages, or after four rings if
		there are no new messages. When the toll
		saver is set as 4/6, the system will answer
		after 4 rings if there are new messages, or
		after six rings if there are no new messages.
		• During setup, the message window displays
		the number of rings (or 24 for toll saver
		2/4, 46 for toll saver 4/6).
Remote access	“Remote access	• Change the remote access code to any
code	code is...”	two-digit number between 10 and 99.
		• The default remote access code is 19. With
		it, you can access many features remotely
		from a touch-tone telephone.

3