Spare Charger Installation, Belt Clip, Headset

INSTALLATION

4Charge the handset battery.

•Place the handset in the base (or the spare charger).

•Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.

5Check for dial tone.

•After the batteries are charged, lift the handset and press P; you should hear a dial tone.

Spare Charger Installation

1 Connect the power cord attached to the spare charger to an electrical outlet not controlled by a wall switch.

2 Follow Steps 3–5 in “Table/Desk Installation.”

Belt Clip

Attach belt clip to the cordless

handset (optional).

a)Slide down into grooves to attach.

b) Push up and away to remove.

Headset

You can use this telephone hands-free when you install any AT&T 2.5 mm headset (purchased separately).

Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

Page 5

Image 5

AT&T 2255 user manual Spare Charger Installation, Belt Clip, Headset, Charge the handset battery, Check for dial tone

Contents

Part 1 Important Product Information With Caller ID/Call Waiting Contents About the Base and the Charger Before YOU BeginAbout Caller Identification Caller ID About Call History Table/Desk Installation InstallationConnect the power cord Install the handset battery Charge the handset battery Spare Charger InstallationBelt Clip Headset Wall Installation Handset Volume Feature SetupFeature Setup Menu Ring Pattern Ring Volume Key Click Auto Answer Handset Name Disable Key LockKey Lock Clear Message Waiting Language Setting Set Dial Mode Telephone Operation Transferring a Call Temporary Tone DialingForwarding a Call Page/Handset Locator Mute Conference Calling Storing a Number and Name in Phone Book Telephone Phone Book Deleting a Number/Name in Phone Book Dialing a Number in Phone BookEditing a Number/Name in Phone Book Reviewing Call History Caller ID OperationRemoving Call Records Removing a Specific Call Record Dialing Options Storing a Call Record in Phone BookDisplay Dial Answering System Operation Audible IndicatorsSet the Clock About Mailboxes Press Uuntil you hear Change announcement Record Your Announcement Feature Summary Answering System Feature Setup Listen To, Save & Delete Messages Adjust Playback VolumePlay Messages Delete Messages Message Window Display Call Screening/InterceptRecord a Memo Voice Menu Remote Access CommandsConnect with the Answering System Record memo End remote access callTurn system off Turn system on Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack If the phone does not work at all, check these items first Case of DifficultyIf you have no dial tone To re-initialize the handset and base If the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf your telephone misdials If the caller’s name or phone number is not displayed If you have difficulty hearing messages If messages are incompleteIf callers are unable to leave messages in Mailbox 2 or If CL appears in the Message Window If your outgoing announcement isn’t clear Advanced American Telephones. All rights reserved