FEATURE SUMMARY | Default settings indicated by *. |
SYSTEM ANNOUNCES: | DESCRIPTION/DIRECTIONS: |
“Change remote access code” Set the remote access code you
50*will use to access features and functions of the answering system from a touch tone phone.
“Change message alert” | When Message Alert is turned on, |
Off * | the base beeps once every 10 |
On | seconds when new messages have |
| been received. |
|
|
“Change announce only” | When you turn Announce Only |
Off * | on, callers hear your |
On | announcement but cannot leave a |
| message. |
|
|
“Change base ringer” | Turn the base ringer on or off. |
On * |
|
Off |
|
“Change number of rings” 2
4*
6
Toll Saver(ts)
Choose how many times the phone will ring before the system answers a call. With Toll Saver active,the system answers after two rings when you have new messages and after four rings when you have no new messages.
¥NOTE: Exit Feature Setup at any time by pressing a MAILBOX/STOP button.
45
