TELEPHONE OPERATION
Changing Channels
This cordless telephone has an advanced AutoSelect feature that minimizes the chance of interference. When the phone is looking for a clear channel, the screen displays SEARCHING.... If it is unable to locate a clear channel, the screen displays TRY AGAIN. Hang up and try your call again.
In the unlikely event that you notice noise or interference while using the handset:
1Press h.
2If the interference does not clear, move closer to the base and press hagain until you find a clear channel (your call will not be
interrupted).
NOTE: You must be in range to change channels.
Headset Jack
You can use this telephone
1Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.
2Follow instructions under “Making a Call” or “Answering a Call.”
3If you wish, attach the belt clip (see “Belt Clip” in the INSTALLATION section of this manual).
NOTE: The earpiece and microphone on the handset are disabled when the headset is plugged in.
13
AT&T 9340 book_1ATT | 13 | 11/3/98, 12:40 PM |
