AT&T 9340 user manual Mute, Flash, Handset Locator

TELEPHONE OPERATION

most special services; however, some services may actually require a touch tone line. To be sure, ask the company that provides the special service.

1Dial the call, then press *. Any buttons pressed after this send tone signals.

2When you hang up or press F, the phone automatically returns to dial pulse (rotary) dialing.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you.

1Press >while on a call, until the screen displays MUTE; select MUTE.

2To return to your conversation, select UNMUTE.

Flash

Press Fto activate custom-calling services such as Call Waiting or Three- Way Calling. You might have to press other buttons before or after Fas explained in custom-calling instructions provided by your local telephone company.

Page

The Page feature allows you to signal someone at the handset from the base.

•Make sure the CHARGING/HANDSET IN USE light is not lit on the base.

•Press Gon the base. A three-part paging tone will sound at the handset.

NOTE: When the handset is in use or the Ringer is turned off, the Page and Handset Locator features are inactive.

Handset Locator

This feature is useful if you misplace the handset.

To locate the handset using this feature: Press and hold G on the base for approximately four seconds. A repeating paging tone is sounded in the handset.

To cancel the Handset Locator feature: Press any button on the handset or Gon the base. This feature turns itself off in approximately three minutes if you haven’t turned it off before then.

NOTE: You can press Pat any time to cancel this feature and make or answer a call.

12

AT&T 9340 book_1ATT 12 11/3/98, 12:40 PM