1. Dial your telephone number from any touch-tone phone.
2. When system answers, enter your
3. Enter remote commands (see list at right).
4. Hang up to end call and save all undeleted messages.
NOTE: If you pause for more than 10 seconds dur-
ing remote access, you will hear a help menu listing all features & commands. If you issue no com- mand for another 20 seconds, the call will end automatically.
Answering System Operation
Remote access
Use the remote access feature to check your messages while you are away by calling your home phone num- ber from any touch tone phone outside of your home. When the answering system picks up, simply enter a two digit security code to then access your messages. This code is set at 19 by default; see page 32 to change it.
Play all messages | Press to listen to all messages. | |
1 |
| |
Play new messages | Press to listen to new messages. | |
2 |
| |
Delete the message | Press during playback to delete current | |
message. Press 3 twice to delete all old | ||
3 | ||
messages while it is in remote access | ||
33 | ||
idle mode (message not playing back). | ||
| ||
Repeat or go back | Press during the caller’s message to | |
4 | repeat the message. Press during the | |
| beginning of the day and time announce- | |
| ment to go back to the previous mes- | |
| sage. | |
|
| |
Stop | Press to stop any operation (stop play- | |
5 | back, stop recording). | |
Skip to next message | Press to skip current message and | |
6 | advance to next message. | |
|
| |
Review announcement | Press to review current outgoing | |
announcement. | ||
#7 | ||
| ||
|
| |
Record announcement | Press * 7, wait for beep, then begin | |
*7to begin recording | speaking. Press 5 to stop recording and | |
5to stop recording | listen to playback of new announcement. | |
|
| |
Record memo | Press 8, wait for beep, then begin | |
8to begin recording | speaking. Press 5 to stop recording. | |
5to stop recording |
| |
|
| |
Review remote access code | Press # 9 to review remote access | |
#9 | code. | |
Change remote access code | Press * 9 to change remote access | |
*9 | code, then enter desired remote access | |
| code from | |
Help menu | Press to hear list of features & com- | |
*5 | mands. | |
Turn system off | Press to turn off answering system. | |
0 | Incoming calls will no longer be | |
answered. | ||
| ||
|
| |
Turn system on | If off, system will answer after 10 rings. | |
0 | Enter your access code, then press 0 to | |
| turn on. |
36