AT&T E2912 user manual Tabletop mounting, Installation options

Getting started

Installation options

3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and	on the telephone base, then press
the other bracket tabs into slots		and	as
shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone wall
jack. To mount the telephone on the wall,
position the mounting holes		and	over
the telephone outlet mounting studs. Press
and slide the bracket down firmly so the				Telephone outlet mounting studs
telephone is held securely on the telephone
outlet mounting studs.

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the directions below.

1. Remove the telephone base from the wall. 2. Insert the bracket tabs into slots

Unplug the cords from the wall jacks.	and on the telephone base,
Remove the bracket from the telephone	then press the other bracket
base.	tabs into slots and .

3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.