VOLUME
MENU / SEL
TRANSFER
REMOVE
MENU / SEL
TRANSFER
REMOVE
Telephone operation
Options while on calls
Volume control
While on a call, press 
CID/-VOLUME
/VOLUME+ to increase the volume.
Call waiting
If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE/FLASH to put your current call on hold and take the new call. Press
PHONE/FLASH anytime to switch back and forth between calls.
Mute
The mute function allows you to silence the microphone. You can hear the caller, but the caller will not be able to hear you.
To mute the call:
•Press MUTE to silence the microphone. When mute is on, MIC MUTED will display temporarily on the handset screen and MUTE will be shown until mute is turned off.
To
•Press MUTE again and resume speaking. When mute is turned off, MIC ON will display temporarily on the handset screen.
Temporary tone dialing
If dial pulse (rotary) is selected, you can switch to touch tone dialing during a call by pressing TONE*. This can be useful if it is necessary to send tone signals for access to answering systems or
After you hang up or press 
PHONE/FLASH (to receive a call waiting call), the telephone automatically returns to dial pulse (rotary) service.
Channel selection
During a call, if you hear clicks and pops, or if the speech sometimes fades, press CHAN/REMOVE on the handset to scan for a clearer radio channel between cordless handset and base.
17
